PowMr MPPT 10A 30A 40A Solar Charge Controller 12V/24V Battery Regulator LCD

  
PowMr MPPT 10A 30A 40A Solar Charge Controller 12V/24V Battery Regulator LCD. Note:The 10A's controller max pv input voltage is 60V.

MPPT Solar Controller support for 4 type Battery charging: Lead-acid (Sealed, AGM, Gel, Flooded), User and Lithium. Battery temperature compensation function to ensure the controller's life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. This MPPT Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current.

Maximizing the energy from solar panels to charge your system. Negative Ground Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%. The use of internationally renowned brands ST, IR high-quality, low-loss devices to extend product life. Standard Modbus communication protocol based on RS485 communication bus, communication distance more longer. MPPT charge Controller with blackligh LCD screen for displaing system information and working condition. Die-cast aluminum design allows for efficient heat dissipation.

Multiple load control modes: manual control, lighting ON / OFF, light On+Timer. Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.

Wide MPPT operating voltage range. LCD display design, dynamically displaying tool's operating data and working condition. Available for PC monitoring and external display realizing real-time data checking and parameters setting. Charging Power and Current Limitation Function. User programmable for battery types, load control etc. Accurately recognizing and tracking of multiple power point.

PV short circuit / PV reverse polarity /Battery over voltage. Battery over discharge / Battery reverse polarity / Load overload protection. Added Features(than Tracer A). Blacklight LCD Display / Common Negative Ground / Support lithium Battery / More Safety Protection.

Step: Connect the system in the order of 1. PV array, and disconnect the system in the reverse order 3. Battery must be connected first!! Never connect the soalr panel array to the controller Without/Before a Battery. DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!

If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. The wire size is only for reference.

If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".

solar-eu" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Item: 40A/PV 100V
2. Resistance Properties: Dustproof
3. Recommended Environment: Indoor/Outdoor
4. Colour: Grey
5. Type: Solar Panel Kit
6. System Configuration: Hybrid
7. Wattage: 700-799 W
8. Features: Flexible
9. Application: Home/Garden
10. Current Rating: 10A/30A/40A
11. Pliability: Rigid
12. Product Line: PowMr
13. Unit Type: Unit
14. Material: Alloy
15. Protection Properties: Surge Protection
16. Current Output: 10A/30A/40A
17. Power Source: Solar
18. Current Type: DC
19. Voltage: 12/24V
20. Brand: PowMr
21. Model: 1206AN/3210AN/4210AN
22. Charging Mode: MPPT (Maximum Power Point Tracking)
23. Power: 701-800 W
24. Unit Quantity: As your choice
25. Solar Technology: All
26. Maximum Input Voltage: 60V/100V
27. Inverter Technology: Hybrid