200W solar panel charging kit for motorhome caravan boat 20A controller 200 watt

The UK solar power specialist Photonic Universe Ltd is proud to offer this brand new, premium quality 200W 12V solar charging kit which includes a 200W 12V monocrystalline solar panel with 5m of special solar cable and a 20A Photonic Universe solar charge controller. No-quibble 30 days return period. Free lifetime technical product support. Deep industry expertise and knowledge.

This high efficiency, waterproof 200W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current e. The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).

The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.

These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Maximum power voltage: 20.2V.

Maximum power current: 9.9A. Open circuit voltage: 23.9V. Short circuit current: 10.52A. Power allowance range: +/- 3%.

Dimensions: 111 x 99.2 x 4 cm. 8 mounting holes 9 x 11 mm. 2 x 5m of high quality single core solar cable 4.0mm cross section. Male and female MC4 connectors attached (can be cut off when wiring to the solar controller). This high quality, brand new powerful 20A 12V/24V solar charge controller is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery.

PWM technology can also recover some lost battery capacity. This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button.

One of the greatest benefits of this powerful 20A controller is the small size - only 14 x 7cm. This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods.

1 The controller can be connected to a remote meter MT50 with an LCD screen. Which displays system performance information, and allows the user to manually adjust parameters and load settings. 2 The controller can be connected to a Wi-Fi module.

3 An RJ45 to USB cable. Can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).

Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the'load' settings e. Set timers for lighting, fans, pumps and more. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor.

Which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors. Fully automated operation and auto 12/24V selection. Wide solar input voltage range up to 50V. 3 pairs of terminals (input, battery, output).

LEDs to indicate charging, battery and load. Temperature sensor for automatic compensation (-3mV/°C/2V). Over load protection (=1.05 times the rated discharge current).

Short circuit protection (=2 times the rated discharge current). Over charge / discharge, overheating and other protection features. Self-consumption: = 8.4mA (12V) / = 7.8mA (24V). Working temperature: -35C to +50C.

Terminals for wire up to 10mm2. Size: 15.9 x 8.1 x 4.8 cm.

Multiple mounting holes for ease of installation. The controller is packaged in its original carton box and comes with a detailed user manual. Please note this is an essentials kit and does not include brackets or battery cable. For example: our complete mounting set with corner brackets, side brackets and a cable gland.

And a 5m 4.0mm dual core battery cable with a fuse holder, fuse and ring terminals. If your system requires a premium quality, long-life battery, we recommend our AGM.

Deep-cycle batteries for your application. (tick the box "This is not about an item" if you don't know this item number). We accept Pay Pal, cheques, credit and debit cards, and bank transfer payments. Upon receipt of the item, please examine it carefully.

To enable us to deal with the courier efficiently, we may ask for some additional details, e. Photographs of the damage and packaging. Please ensure that we receive the item in its brand new, original condition, i. Take reasonable care to wrap and protect it on the way back to us.

Solar cells are guaranteed to produce at least 90% of nominal power in 10 years and 80% of nominal power in 25 years. Photonic Universe Ltd is a company based in London, United Kingdom. We design and supply solar and wind renewable energy products and complete off-grid power systems for various applications, to both trade and retail customers. Tens of thousands of clients all over the world rely on our products to generate clean energy for their households, vehicles, boats and remote places with no access to mains electricity. From our customers who have been impressed by the high quality of our products and excellent service.

We are VAT registered in the UK and can provide VAT receipts upon request. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "photonic_universe" and is located in this country: GB. This item can be shipped to United Kingdom, United States, European Union.

Type: Solar Panel Kit
MPN: SWD-200M-PU2024B
Brand: Photonic Universe
Solar Technology: Monocrystalline
Power: 200 W
Charging Mode: PWM (Pulse Width Modulation)
Voltage: 12 V
EAN: 5060297344206