12.8V 200AH-8AH Lithium Battery LiFePO4 5000+ Deep Cycle for Solar Panel Kit RV

  

Voltage 12.8V Cell type LiFePO4 Capacity 50Ah Discharge temperature -20°C -60°C Total energy 640Wh Max. 12.8V 200AH-8AH Lithium Battery LiFePO4 5000+ Deep Cycle for Solar Panel Kit RV.

Shentec 12.8V 8AH-200AH LiFePO4 Battery Description. Lithium iron phosphate battery is recycled more than 5000 times, which is more than eight times that of lead-acid batteries (300-400 times). The service life can reach 10 years under ideal conditions. The weight of lithium battery is 1/3 that of lead-acid battery. It is easy to carry and install.

The attribute of "harmless and clean energy for the environment" definitely makes it an ideal replacement for most of the conventional ones Lead-Acid Cycle Batteries. Our BMS is a multi-channel battery monitoring and balancing system for LiFePO4 battery packs. Battery has built-in BMS (battery management system), low self-discharge, can prevent overcharge, over-discharge, over-current, overload, short circuit. The LiFePo4 lithium battery is safe, efficient and portable, suitable for RV, caravan, electric boat, golf cart, children's vehicle, tool trailer, solar panel, or can be used as backup power. [Caution]This battery is not suitable for motorcycles or starter batteries.

Shentec 12.8V 8AH-200AH LiFePO4 Battery Specifications. [Supports Bluetooth connection] The built-in Bluetooth module allows you to monitor the status of your battery accurately and conveniently in real time. [LCD display Battery voltage and capacity] The LCD screen can display the charging status and charging temperature in real time. The battery management system monitors and controls each unit of the battery to ensure the battery shut down in the event of undervoltageoroverload, and restarts automaticlly once the problem isresolved to avoid damaging the battery.

Lmportant functions ofthe battery managementsystem. When overcharging occurs, the BMSwillturn offthe battery output to protecthe battery. The battery has no voltage at this time; When the conditionreturns to normal, the battery will automatically return to normal. Eachcellin the battery individuall monitors the battery discharge. F thistums off the battery output, the only waytotumthebattery backon is tochargeitNote: Evensmallconsumersuch as alamsystems, relays, backupsstems et. Consumecapacty and drain the battery.

Fyoudontuse the batteryforalong time, please disconnect all connections between the battery and the system. The chargingvoltageofa single cell mustnotexceed3.65Vcell, otherwise, the batterywill bedamaged byovenvoltage.

Therefore, itis best to useasuitable charger withafinalcharging voltageof14.4Vto 146VtochargetheLiFePO4 battery. AthoughBMScan protecthebattery from overcharging it needsto absorb and burn electicity by itself. Fthe chargingvoltage exceeds14.6 for alongtime, itwildamage the BMS!

Thebuili-inactive balancer can adjustthebattery atany time to ensurethe intemalsmall batteries cells have thesamevoltage and prolong battrylfe. BMSalways monitors and control all parameters forreliable and safe charging if something goes wrong youcan prevent charging bytumingofit hebattery output to protect the battery. 1x LiFePo4 Battery 1x User Manual. Can this battery be charged with a lead-acid battery charger? We recommend our customers to use a professional LiFePO4 charger for charging.

A lead-acid charger cannot fully charge a LiFePO4 battery. Can these LiFePO4 batteries be connected in parallel or in series? Theoretically yes, but you must ensure that the batteries are fully charged and all have the same voltage level before using them in series or parallel. We do not recommend mixing series and parallel.

What should I do if the battery is not charged and cannot be used? Our battery BMS has several protection functions to ensure safety: short circuit protection, overcurrent protection, overload protection, overvoltage protection, overcharge protection and overdischarge protection. Once a protection has been triggered, the battery is temporarily unusable. Lf the depth of LiFeP04 discharge is too large, it may cause ham and danger. Please install safety relays or circut breakersto prevent thesilent loads from being deeply discharged. When the lithium battery is damaged or overcharged, the lithium battery emits harmful gases such as phosphate.

The temperature range in which the battery can be charged is between 0? Charging the battery at temperatures outside of thisrange can severely damage the battery or shorten the life of the battery. The battery can discharge a temperature range from -20? Discharging the battery at a temperature outside of this range canseverely damage the battery or shorten the battery life. International Buyers - Please Note.

We understand that sometimes an item may not turn out to be just what you need. DO NOT send without communication. If you have any problem with the item or the order, pls feel free to contact me, we will reply you asap after we read it.

It's just take you 1 minute. 20 years of Research & Development and manufacturing experience makes us more professional on quality control, user experience and after-sale services. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".

The seller is "igreenpower" and is located in this country: GB. This item can be shipped worldwide.

1. Battery model: 30AH
2. Brand: SHENTEC
3. Type: LiFePO4 Battery
4. Chemical Composition: Lithium Iron Phosphate (LiFePO4)
5. Application: Solar/Wind Devices
6. Unit Quantity: 1
7. Voltage: 12.8V
8. Country/Region of Manufacture: China
9. Unit Type: Unit
10. Power Source: Solar
11. System Configuration: Off-Grid
12. Wattage: 100Wh-1920Wh
13. Features: Corrosion Resistant, Portable, Fast Charing and Discharging, Smart BMS Built-in, Battery Temperature Protection
14. Solar Technology: Amorphous (Thin-Film)
15. Resistance Properties: Abrasion Resistant, Chemical Resistant, Corrosion Resistant, Dustproof, Heat Resistant, Impact Resistant, Moisture Resistant, Scratch Resistant, Shockproof, Tear Resistant, Waterproof, Weather Resistant, Weatherproof
16. Current Type: DC
17. Power: 100Wh-1920Wh
18. Current Output: 4A-75A
19. Charging Mode: MPPT (Maximum Power Point Tracking)
20. Current Rating: Greater Than 10 A
21. Model: SH-VB Series
22. Pliability: Semi-Flexible/Semi-Rigid
23. Cell Quantity: 1